
Multi Bladder Chuck
A variant of the multi bladder shaft with a through bore inside, for holding on a shaft.
Chucks that hold the core directly, using pneumatic, cam and wedge designs for unwind, rewind and shaftless machines.
6 products

A variant of the multi bladder shaft with a through bore inside, for holding on a shaft.

A cam-type shaft makes the chuck hold the core in a positive gripping position.

Mainly used on primary slitter rewinders. It has a basic cam design with a very narrow gripping width.

One of the heaviest and most durable core-holding options, where the mechanical advantage of a taper wedge is applied through a high-pressure pneumatic cylinder.

A taper wedge design used for core holding, where the force is applied through the arms. It is truly mechanical and foolproof.

A simple bellow-type chuck mounted on an aluminum body for holding the reel. It is used with a side clamp or a set screw on the base shaft.
Sizes and materials as listed for each product. Full details are in the product data sheets.
| Series | Product | Sizes | Materials |
|---|---|---|---|
| 221 | Multi Bladder Chuck | 8" up to 12" | Aluminum; steel in special cases; Rubber, plastics and aluminum |
| 501 | Torque Chuck | 3", 4", 5", 6", up to 12" | Alloy steel |
| 505 | Rewind Arm Chuck | 3", 6" up to 12" | Steel; Steel |
| 531 | Air Power Chuck | 3", 6" up to 12" | Steel; Alloy steel; Spring steel |
| 551 | Thrust Chuck | 3" to 12" | Alloy steel; Hardened steel |
| 561 | Air Chuck | 6" onwards | Aluminum alloy; Rubber polymer |
Share your machine details, core size and application, and our team will recommend a suitable product.