
Lug Shaft
Grippers are slit through the metal pipe and a pneumatic bladder is used for inflating. The grippers give positive holding of the core.
21 product series for the printing, packaging, converting and paper industries, designed and manufactured in-house in Vadodara.
25 products

Pneumatic and mechanical shafts that grip the core from inside for winding and unwinding.
View category
Grippers are slit through the metal pipe and a pneumatic bladder is used for inflating. The grippers give positive holding of the core.

An external lug-type expanding shaft whose wedge-type design makes concentric holding possible and allows high-speed winding.

Made of aluminum extrusion with steel journals tight-fitted for high torque capability. It is assembled with a PU tube for longevity.

Fundamentally a multi bladder shaft with tight tolerance, with an external body that holds anvils or knives precisely in place for slitting operations.

The basic structure of the multi bladder shaft, with a special internal valve design to handle reels at much higher linear speeds. The shaft is assembled with PU tube and hard rubber ledges for long life and operation.

A pneumatic expanding shaft for winding and unwinding rolls on cores. Inflating the internal bladder pushes the expanding elements out to grip the core evenly along its length, and releasing the air frees the roll for quick removal.

A pneumatic expanding shaft with full-length leaves set into the shaft body. Inflating the internal bladder pushes the leaves outward to grip the core evenly along its entire length, and releasing the air retracts them for quick roll removal.

Shaft holders that lock the shaft journal and transfer torque, in tilting, sliding and adjustable designs.
View category
A holder with a tilting flange for safe shaft resting. The square cavity allows torque to be transferred to the shaft and drive, providing much-needed safety for the operator and the processed material.

A variant of the classic safety chuck. The sliding flange allows the shaft to be locked in position while transferring torque at high RPM.

A safety chuck with an air-operated locking flange. Compressed air opens and closes the flange, so the shaft can be locked and released without manual handling, which speeds up reel changes and suits automated machines.

Certain materials need alignment adjustment while the shaft is rotating on the machine. This safety chuck is designed to handle reel shifting in either direction up to 25 mm. The sliding flange design is based on the standard safety chuck with locking mechanism; thrust is applied by a lead screw, and the sliding drive is taken care of by spline and cam for smooth adjustment at high speed.

Chucks that hold the core directly, using pneumatic, cam and wedge designs for unwind, rewind and shaftless machines.
View category
A variant of the multi bladder shaft with a through bore inside, for holding on a shaft.

A cam-type shaft makes the chuck hold the core in a positive gripping position.

Mainly used on primary slitter rewinders. It has a basic cam design with a very narrow gripping width.

One of the heaviest and most durable core-holding options, where the mechanical advantage of a taper wedge is applied through a high-pressure pneumatic cylinder.

A taper wedge design used for core holding, where the force is applied through the arms. It is truly mechanical and foolproof.

A simple bellow-type chuck mounted on an aluminum body for holding the reel. It is used with a side clamp or a set screw on the base shaft.

Friction shafts and locking elements for slitter rewinders, where each slit reel must run at the same tension.
View category
A shaft specially designed for slitters to handle constant tension on multiple slits. The base steel shaft has multiple bladders, mounted with ball locks for reel holding.



A roller with PU cord mounted in a grooved roller. The cord stretches in and out as the roller rotates.

A curved steel roller with a rubber sleeve unit for removing wrinkles from the web.

Equipment for lifting reels and handling long, heavy shafts.
View category
A tool for handling longer and heavier shafts. The mechanism is designed with the flexibility to hold various shaft designs in a single stand. It is purely mechanical and can be automated on request.

A mechanical clamping shaft designed to lift reels from the floor. The reel is simply locked by the locking latch on the top.

Replacement bladders, tubes, lugs, valves and components for shafts and chucks.
View category

The most widely used friction element for differential winding. A steel, aluminum or engineering plastic body is specially manufactured to act as a gripper with a ball.
Each product line carries a series number. Find yours and go straight to the product.
Share your machine details, core size and application, and our team will recommend a suitable product.